Harben's distinctive bullet proof rotary piston water pump is featured as standard equipment on all Harben "E" series jetters.

• Pump solvents, salt water and fresh water
• 8-cylinder design delivers a peak flow rate of 16 gpm and peak pressure of 4,000 psi. "P" pumps with optional flow rates and pressures available
• Run dry without water indefinitely!
• 5-year warranty!
• Long service life uniterrupted by repairs and downtime

Industrial class 3-cylinder Deutz air cooled diesel engine

• Rated 48-h.p. @ 2,800 rpm
• Automatic low oil pressure and high temperature engine shut down safeguards
• Two-year comprehensive warranty; key components warranted for three years
• Space saving footprint
• Mounted on vibration absorbing insulation pads
• Low noise emission design alleviates the need for expensive noise insulation measures
• EPA Clean Air Act Interim Tier 4 qualified>
• For California users, all "E" jetter diesel engines are exempt from CARB PERP fees, registration requirements and inspections.
• Upgrade this engine with shrouded air and water cooled diesel engines from Hatz and Kubota

• Shrouding protects against injury, vandalism and mischief
• Flexible couplings dampen noise and reduce vibration
• Elimintation of drive belt(s), bushings and sprockets means lower repair costs and downtime

• Repairable
• 300-gallon capacity. Add additional tanks to fit customized applications
• U.V. protected
• 5-year warranty
• Rigid fill line pipe with hydrant or garden hose fitting
• Tank air gap to protect against cross contamination

• Protected from water intrusion and vandalism. NEMA 4 rated
• Generic, off the shelf after market ensures expedited availability of replacement at a lower cost
• Controls feature LED start-up and warning lights, digital engine hour meter and 12-volt keyed ignition switch

• "E" jetters feature hydraulic powered Hannay hose reels. Reel dimensions may be customized to meet specific requirements.
• Reels are provided with 500-feet of 1/2 inch high pressure hose.
• Hose reels are mounted on frames constructed of sectional steel tubing—not angle iron.
• Reels are positioned on the reel frame to reduce exposure to accidental damage from backing.
• Pivoting hose reel. Reel manually pivots a minimum of 45-deg. to the left and 90-deg. to the right. 4 locking positions
• Reels are furnished with a manually operated level wind hose guide with lever handle.
• Reel drums are powder coated—not painted—for durability in wet and harsh environments

• A lockable 6.7 cu. ft. polyethylene storage box is standard on all "E" series jetters.
• Measures 32" L x 19" W x 20" H
• A top hinged, full opening lid ensures the safe containment of loose, bulky items.
• Poly boxes are designed for long term use in all environments without the risk of deterioration.

• Engineered for durability and easy towing.
  • Rugged tubular steel frame with leaf spring suspension and a single axle. Dual axles available
  • Weighs under 3,000 pounds. Trailer axle and suspension GVWR: 6,400 pounds
  • 16" painted wheels
• Choose from standard electric or hydraulic surge trailer brakes. Hydraulic surge brakes are a convenience option provided by Harben at no additional cost, when requested.
• Frames, control panel, engine and hose reel are powder coated—not painted—for added protection against deterioration in harsh environments.
• Solid colors other than white and distinctive pin striping are provided as extra cost options
• 2-5/16" ball hitch (pictured)

Fenders installed on Harben "E" trailers are coated with an epoxy chip guard and equipped with an amber clearance light to conform with Federal DOT and State of California vehicle regulations.

Ref.: Code of Federal Regulations, Title 49, Part 390, "Federal Motor Safety Regulations" and California Motor Vehicle Regulations, Title 13, Section 25100, "Clearance and Side-Marker Lamps".